Home > Format Error > Format Error In Disk Private Region

Format Error In Disk Private Region

use vxdisk -e list to view the the cXtYdZ name related to emcpower. The filename can be anything that will help you remember the file: # dd if=/dev/rdsk/c2t4d1s3 of=/tmp/c2t4d1s3_privreg 5) Run the following script on the file you created in step 4. (If You may also refer to the English Version of this knowledge base article for up-to-date information. If one of these "configuration copies" gets corrupted because of a bad block on the disk, the disk will be marked as "online altused" to notify the administrator that one of http://epssecurenet.com/format-error/format-error-occurred-at-offset-low-level-format.html

I am able to see the disk on vxdisk list. I have read that Microsoft have a tool to extract a log for the MBR so that it can be analysed and this problem fixed but I'm having real trouble finding Problem Statement: There are several scenarios where a disk under the control of volume manager software control can get into an "online altused" state. No Yes Did this article save you the trouble of contacting technical support?

If you cannot correct the changes you entered, you must re-create and reformat all volumes on the disk. The Server 2003 disk doesn't pick up another installation of windows to do a full installation repair. Also, I strongly suggest that you contact some data recovery companies, as this problem is probably caused by some hardware failure or improper operation and some critical data may have been

It is possible that updates have been made to the original version after this document was translated and published. Terms of use for this information are found in Legal Notices.

Related Articles Article Languages x Translated Content Please note that this document is a translation from English, and may When I run the command vxdisk -o alldgs list I see my disk listed as online Code: emcpower65s2 auto:none - - online invalid It is erroring out when I am trying logs: count=1 len=167tocblks: 0tocs: 2/1533Defined regions:config priv 000017-000247[000231]: copy=01 offset=000000 enabledconfig priv 000249-001119[000871]: copy=01 offset=000231 enabledlog priv 001120-001286[000167]: copy=01 offset=000000 enabled***NOTE*** Look for the line marked flags, there should not be

logs: count=1 len=167 tocblks: 0 tocs: 2/1533 Defined regions: config priv 000017-000247[000231]: copy=01 offset=000000 enabled config priv 000249-001119[000871]: copy=01 offset=000231 enabled log priv 001120-001286[000167]: copy=01 offset=000000 enabled Note: Look for But the thing is When I am trying to initialize the disk using /etc/vx/bin/vxdisksetup -i emcpower65s2 I am I am getting error. bash-3.00# vxdisksetup -i emcpower65s2 VxVM vxdisksetup ERROR V-5-2-2206 emcpower65s2: An invalid device address was specified; it must be of the form cCtTdD, mcCtTdD or _ where C = host bus adapter The Solaris OS is now owned by Oracle.

The result will be output similar to the following:* /dev/rdsk/c2t4d1s2 partition map** Dimensions:*     512 bytes/sector*     258 sectors/track*       5 tracks/cylinder*    1290 sectors/cylinder*    6907 The private regions are not corrupted but have sequence numbers out of sync. I've tried to run a recovery with the windows disk, but the recovery console, although picking up two partitions, does not assign drive letters and therefore I can't access the data. BLEEPINGCOMPUTER NEEDS YOUR HELP!

In some cases this procedure will not work because of an actual hardware problem on the physical disk. jpkumar10 View Public Profile Find all posts by jpkumar10 #4 07-15-2011 cerber0 Registered User Join Date: Nov 2008 Last Activity: 18 September 2016, 8:30 AM EDT Location: Mexico A case like this could easily cost hundreds of thousands of dollars. Be cautious when making any changes to the structures of your hard disk.

No Yes Did this article save you the trouble of contacting technical support? http://epssecurenet.com/format-error/p2-format-error.html Thanks in advance. We appreciate your feedback. In either case, the following symptoms will occur: # vxdisk listDEVICE TYPE DISK GROUP STATUS c0t8d0s2 sliced rootdisk rootdg online c0t9d0s2 sliced disk02 rootdg online c1t0d0s2 sliced disk01 rootdg online c2t4d1s2

following error. Create/Manage Case QUESTIONS? CONTRIBUTE TO OUR LEGAL DEFENSE All unused funds will be donated to the Electronic Frontier Foundation (EFF). http://epssecurenet.com/format-error/format-error-11.html Can you please let me know how to clear this error and how to get CTDS values.

No Yes How can we make this article more helpful? Last edited by pludi; 07-13-2011 at 03:48 PM.. Remove advertisements Sponsored Links jpkumar10 View Public Profile Find all posts by jpkumar10

#2 07-13-2011 saurabh84g Other recent topics Remote Administration For Windows.

Cookies helfen uns bei der Bereitstellung unserer Dienste.

Over 25 plugins to make your life easier TechNet Products Products Windows Windows Server System Center Browser   Office Office 365 Exchange Server   SQL Server SharePoint Products Skype for Business I am able to see the disk when i run the powermt display dev=all command o/p. If the output is not good, you might also get an error message that is similar to the following: vxvm:vxprivutil: ERROR: join operation failed: Format error in disk private The filename can be anything that will help you remember what file is what. # dd if=/dev/rdsk/c2t4d1s3 of=/tmp/c2t4d1s3_privreg 5) Run the following script on the file created in step 4. (If

Click here to get your free copy of Network Administrator. Using the site is easy and fun. Please help in finding the correct disk id. check over here In either case, the following symptoms will be seen. # vxdisk list DEVICE TYPE DISK GROUP STATUS c0t8d0s2 sliced rootdisk rootdg online c0t9d0s2 sliced disk02 rootdg online c1t0d0s2 sliced disk01 rootdg

I'm running a server with 2 partitions on an 80Gb drive, c:/ drive as the OS and d:/ drive as a file-server. It shows how to exploit the potential of Veritas Storage Foundation by conveying information about the design concepts of the software as well as its architectural background. If you can see the problematic disk in that console, please run the dmdiag command-line utility to check the status of the disk. For more details, please Install the SUPPORTS.MSI from the CD/DVD installation media under the path "SUPPROT\TOOLS" and read the dskprobe.chm in detail.