File System Error Reading Inode Hp-ux
Action Unmount the file system and use fsck to run a full structural check. Running a dd to /dev/null on both disks would also be a good idea to verify there is not a disk problem.# dd if=/dev/rdisk/disk2 of=/dev/null bs=1024k# dd if=/dev/rdisk/disk3 of=/dev/null bs=1024kIf that I have also logged a CASE with HP and they have suggested to install 3 network patches on the server.Thanks * regards,Kavita 0 Kudos Reply The opinions expressed above are the And this Blog is dedicated to all ADMIN (ROCKSTARS) for their contribution.
HPUX :After a Firmware update, the rx7620 would No... CALL US: 1 (866) 837-4827 Solutions Unstructured Data Growth Multi-Vendor Hybrid Cloud Healthcare Government Products Backup and Recovery Business Continuity Storage Management Information Governance Products A-Z Services Education Services Business Critical These two failures can then easily result in VxFS reporting corrupt metadata content whilst the file system is mounted (after a system crash event), any corrupt metadata content errors will be
Unmount the file system and use fsck to run a full structural check. 057 WARNING: msgcnt x: mesg 057: V-2-57: vx_esum_bad - mount_point file system extent allocation unit summary number number Offline conversions tools will be provided in the next VxFS feature release to aid in migrating volume-image backup copies of Version 2 disk layout file systems to a Version 4 disk SOLUTION: Check the console log for I/O errors. A validation check failure indicates the file system has been corrupted.
If the problem is a disk failure, replace the disk. Unmount the file system and use fsck to run a full structural check. 017 WARNING: msgcnt x: mesg 017: V-2-17: vx_attr_getblk - mount_point file system inode inumber marked bad in core cmrunpkg :Unable to start some package Node is not eligible. https://community.hpe.com/t5/System-Administration/vx-ilisterr-vx-iread-file-system-error-reading-inode-ERROR/td-p/6779270 Could be a bad block.
At least one link must be active to maintain the integrity of the cluster. When inode information is no longer dependable, the kernel marks it bad on disk. Normally it would be a bad disk but I do not see any errors on the root disks and none of the other file systems in vg00 are complaining. The disk driver should have printed a message that may provide more information. 040 WARNING: msgcnt x: mesg 040: V-2-40: vx_dqbad - mount_point file system user quota file update error
- This happens occasionally when a process is hung and it can't be killed before unmounting the root.
- Action VxFS will retry the thread creation until it succeeds; no immediate action is required.
- In the event of a system crash whilst the file system was mounted locally the PNOLTs are not utilised, but the fsck intent-log replay will still check for the flags in
- No other action is necessary.
- If no user or process is writing to the device, report the problem to your customer support organization.
No Yes Did this article save you the trouble of contacting technical support? http://unixpedia.blogspot.com/2014/03/hpux-stand-corruption.html Template images by belknap. If the disk has failed, replace it before the file system is mounted for write access. To manage the intent-logs, and other extra objects required for CFS, we also create a holding object call a PNOLT - Per Node Object Location Table.
Action The file system was not written, so no action is required. Check This Out If there is any I/O problem or the structure is inconsistent, the kernel sets the VX_FULLFSCK flag and the mount fails. UNIXPEDIA : THANK YOU FOR VISITING THE PAGE Collectoin of Daily error /var/adm/log_Archive ► 2016 (1) ► June (1) ► 2015 (7) ► March (1) ► February (5) ► January (1) No Yes Did this article save you the trouble of contacting technical support?
Action Resolve the condition causing the disk error. Often, there is plenty of space and one runaway process used up all the remaining free space. HPUX : How to configure Quorum server for the clus... http://epssecurenet.com/file-system/file-system-error-the-index-data-is-damaged-physical-file.html If the VX_FULLFSCK flag cannot be set, the file system is disabled.
Action Upgrade your disk layout to Version 6 for shared mounts. The soft limit can be exceeded for a certain amount of time before attempts to create new files begin to fail. The unmount failure was caused by a pending asynchronous fileset operation, such as a fileset removal or fileset conversion to a nodata Storage Checkpoint.
To get the most space with the least amount of work, remove large files or file trees that are no longer needed.
If the system won't come up and a full structural fsck hasn't been run, reboot the system on a backup root and manually run a full structural fsck. If the disk has a hardware failure, it should be repaired before the file system is mounted for write access. 042 WARNING: msgcnt x: mesg 042: V-2-42: vx_bsdquotaupdate - mount_point A validation check failure indicates the file system has been corrupted. If the disk failed, replace it before remounting the file system. 021 WARNING: msgcnt x: mesg 021: V-2-21: vx_fs_init - mount_point file system validation failure Description When a VxFS file system
Description The size of the FCL file is approching the maximum file size supported. Action Unmount the file system and use fsck to run a full structural check. 025 WARNING: msgcnt x: mesg 025: V-2-25: vx_wsuper - mount_point file system super-block update failed Description An Action Unmount the file system and use fsck to run a full structural check. 078 WARNING: msgcnt x: mesg 078: V-2-78: vx_ilealloc - mount_point file system mount_point fileset (index number) ilist http://epssecurenet.com/file-system/file-system-error-file-record-corrupted-ntfs.html The message indicates a problem in a scenario where a node failure has occurred in the cluster and the newly selected primary node encounters a failure.
command. Go to Solution. 0 Kudos Reply All Forum Topics Previous Topic Next Topic 5 REPLIES cnb Honored Contributor [Founder] Options Mark as New Bookmark Subscribe Subscribe to RSS Feed Highlight Print HPUX : cmviewcl : Cannot view the cluster configuration. HPUX : SAS PHYSICAL DISK REPLACEMENT PROCEDURE WITH LVM MIRRORING SAS HP-UX 11.23 LVM Disk Replacement Procedure ...
If the file system size cannot be increased, remove files to create sufficient space for new Storage Checkpoints. Use the vxupgrade command to begin upgrading file systems using older disk layouts to Version 6. 095 WARNING: msgcnt x: mesg 095: V-2-95: Setting vxfs_ifree_timelag to time since the specified value The VX_FULLFSCK flag is set in the super-block so fsck will do a full structural check the next time it is run. If no user or process was writing to the device, report the problem to your customer support organization.
After that we started getting this error.Nov 30 03:50:27 mccfwp18 vmunix: msgcnt 2 vxfs: mesg 016: vx_ilisterr - /var file system error reading inode 35104Thanks * regards,Kavita Solved! Action Resolve the condition causing the disk error. VX_FULLFSCK flag is set. The VX_FULLFSCK flag is set.
Disk layout Versions 4 and 5 will still be supported for local mounts in the next release of the VxFS. Action There are one or more private network links for communication between the nodes in a cluster. Report as a bug to your customer support organization. 036 WARNING: msgcnt x: mesg 036: V-2-36: vx_lctbad - mount_point file system link count table lctnumber bad Description Update to the link This is an indication of file system corruption.
Action Unmount the file system and use fsck to run a full structural check. 014 WARNING: msgcnt x: mesg 014: V-2-14: vx_iget - inode table overflow Description All the system in-memory Check the console log for I/O errors. New records will be recorded in the FCL file starting from offset fs_bsize. The kernel will try to set the VX_FULLFSCK and VX_LOGBAD flags in the super-block to prevent running a log replay.
After verifying that the network connections is operating correctly, unmount the disabled file system and mount it again. 082 WARNING: msgcnt x: mesg 082: V-2-82: volume_name file system is on shared